Type:
Vertical Boring Mills (incld VTL)
Manufacturer:
MOMENTUM
Model:
MVL-12
Condition:
Used - Excellent
Year:
2012
Stock #:
2018
Status:
For Sale
Approximately 630 Run time Hours NOTE: Blue Hoist in Front of the Machine not Included Momentum 49” CNC VTL Auto tool Changer & Fanuc 0i-TD Controller Specifications: Travels X-Axis Travel – Ram Left / Right 71.65” Z-Axis Travel – Spindle Up / Down 35.43” Cross Rail Travel UP / Down 19.68” – 3 Positions / 2 Steps Max Swing Diameter 63” Max Turning Diameter 63” Max Turning Height 47.24” Cross Section of RAM 7.87” x 7.87” Table Features Dimensions 49.2” Diameter Maximum Workpiece Weight 17,637 lbs Ram bottom to table top, Max 0-47.44” Low gear table speed 34-103 PM High Gear Table Speed 104 – 312 RPM Max Table Torque 9145 ft.lb Rapid Traverse Feedrate X-Axis 393.7 ipm Z-Axis 393.7 ipm Flood Coolant System Coolant Tank Capacity 18 Gallons Power Requirement 480 Volt, 3 Phase, 50/60 Hz, 80 kVA 60 / 50 HP (30 min / continuous) Floor Space (Standard) 283” x 197” 215” (L x W x H) Machine Net Weight 51,800 lbs Standard Turning Spindle Two Speed Gear head RPM Range 0-312 RPM Standard Spec 34 ~ 312 (low: 34 ~ 103 / high: 104 ~ 312) High Column Spec: 24 ~ 288 (low: 24 ~ 95 / high: 73 ~ 288) Equipped with: 5 Tool Holders – 2 OD Facing, 1 Socket, 1 Burring, 1 Drilling CAT50 ½ dozen available Milling & Live tooling Chip Conveyor Manuals
| Table Dia | 49" |
| Swing | 63" |
| Work Ht-U/R | 47" |
| Power | 60 hp |
| RPM | 312 RPM |
| Control | CNC (Fanuc 0i-) |
Approximately 630 Run time Hours note Built in 2012 - used as demo delivered in 2018 NOTE: Blue Hoist in Front of the Machine not Included Momentum 49” CNC VTL Auto tool Changer & Fanuc 0i-TD Controller Specifications: Travels X-Axis Travel – Ram Left / Right 71.65” Z-Axis Travel – Spindle Up / Down 35.43” Cross Rail Travel UP / Down 19.68” – 3 Positions / 2 Steps Max Swing Diameter 63” Max Turning Diameter 63” Max Turning Height 47.24” Cross Section of RAM 7.87” x 7.87” Table Features Dimensions 49.2” Diameter Maximum Workpiece Weight 17,637 lbs Ram bottom to table top, Max 0-47.44” Low gear table speed 34-103 PM High Gear Table Speed 104 – 312 RPM Max Table Torque 9145 ft.lb Rapid Traverse Feedrate X-Axis 393.7 ipm Z-Axis 393.7 ipm Flood Coolant System Coolant Tank Capacity 18 Gallons Power Requirement 480 Volt, 3 Phase, 50/60 Hz, 80 kVA 60 / 50 HP (30 min / continuous) Floor Space (Standard) 283” x 197” 215” (L x W x H) Machine Net Weight 51,800 lbs Standard Turning Spindle Two Speed Gear head RPM Range 0-312 RPM Standard Spec 34 ~ 312 (low: 34 ~ 103 / high: 104 ~ 312) High Column Spec: 24 ~ 288 (low: 24 ~ 95 / high: 73 ~ 288)
Equipped with: 5 Tool Holders – 2 OD Facing, 1 Socket, 1 Burring, 1 Drilling CAT50 ½ dozen available Milling & Live tooling Chip Conveyor Manuals
