Hyundai Kia SKT-V5L High Performance CNC Vertical Turning Center - 2009 - 3193
Vertical Turning Center, Vertical Turning Center CNCFanuc 21i-TB Control
Note: Tools in turret NOT included
General Capacity
Maximum Swing 31.54”
Maximum Cutting Diameter 21.7”
Maximum cutting length 23.6”
X-axis travel 12.8”
Z-axis travel 24.6”
Turret (Bi-directional)
Type Hydraulic index motor
No. of Tools 12
Index Time 0.8 sec.
Square tool shank 1.0”
Round tool shank 2.0”
Clamping force 17,416 lbs
Spindle
Spindle nose ASA A2-11
Chuck Size 15”
Spindle speed range 20~2,000 rpm
Full power range 256 ~ 1,528 rpm
Max. torque 607.6 ft-lbs
Motor (30 min.) 30 HP
Standard through hole 2.46”
Machine
”
Ball-Screw diameter X/Z 2.0” / 2.0”
Ball Screw pitch X/Z 0.39”/ 0.47”
Guide LM Guide (Ball)
Feed System
Rapid Traverse X/Z 787 / 709
Maximum cutting feed 197 ipm
Motor power X/Z 4.0 ./ 5.3 HP
Hydraulic
Tank Capacity 13.2 Gallons
Operating pressure 996 psi
Coolant
Coolant Volume from nozzle Gallons per Minute
Tank capacity 53 Gallons
Pump capacity 52.8 gallons per minute
Load Capacity
Chuck Work 1,102.3 lbs
Center Work lbs
Static Accuracy
X axis repeatability +/- 0.00012”
Z axis repeatability +/- 0.00012”
Turret indexing =/- 0.0000 degree
Electric Supply
Voltage 200 ~ 220 AC, 3 Phase
KVA 60
Equipped with
Chip Conveyor (Side, Hinge type)
15” 3 Chuck open/close confirming device
Auto Door
Door Interlock
Turret upgrade to 12 Station
Machine Weight 22,046 lbs
Floor space 73” x 111.0”
Machine height 115.35