Capacity

Max. Turning Diameter 7.5”
Standard Turning Diameter 6.7”
Distance Between Centers max. 29.6”, min. 7.9”
Max. Turning Length 20.3”
Bar Capacity 2”

Axis Travel

Slide Travel X1 / X2 6.6”
Slide Travel Z1 / Z2 20.3”
Slide Travel Y +/-1.4”
Slide Travel (B-axis) 23.7”
Rapid Feed X1 / X2 630 IPM
Rapid Feed Z1 / Z2 1575 IPM
Rapid Feed (B-axis) 1575 IPM
Rapid Feed Y 236 IPM

Left and Right Spindles

Spindle Speed 5000 RPM
Spindle Speed Range Stepless
Spindle Nose A2-5
Hole Through Spindle 2.5”
Hole Through Draw Tube 2”

C-axis

Least Input Increment degrees 0.001
Least Command Increment degrees 0.001

Rapid Index Speed 600 RPM
Cutting Feed Rate 1~4800 deg/min
C-axis Clamp Disk Clamp

Upper and Lower Turrets

Type of Turret Head Dodecagonal Drum Turret
Number of Tool Stations 24
Number of Indexed Positions 48
Tool Size Square / Round 1” / 1.3”

Rotating Tool
Rotary System Individual Rotation
Spindle Speed rpm 6000 RPM

Drive Motor
Left Spindle 20 / 15 HP
Right Spindle 15 / 10 HP
Driven Tools 7.5 HP

Machine Dimensions (L x W x H) 142 x 78 x 73
Machine Weight 19,621 lbs

Equipped With:
NOTE: Cutting Tools inside the holders ARE NOT INCLUDED - Thank you
NT SmartX Control
2 Turrets
Y-Axis ( upper turret)
Milling ( lower turret)
2 S-20 Collet Chucks
1 Kitagawa B-206 3 Jaw Chuck
C-Axis
High Pressure Coolant
Removable Tool Setter
LNS Chip Conveyor
Parts Catcher G
Parts Conveyor
LNS Quick Load Servo S3-T Bar feed
Spindle Liners

(1) KZ1510 CROSS MILL/DRILL ER25, 16912076
(1) KZ1510C CROSS MILL/DRILL ER25, COOLANT THRU
(1) KZ1510S CROSS MILL/DRILL, 2:1 SPEEDER, ER20, MA2.5S RT 2:1 16912031
(3) KZ1513 FACE MILL/DRILL ER25

This is a low hour, one shift machine that machined mostly 3/16” Stainless

220 Volt 3 Phase 60 Cycle
Machine Dimensions (L x W x H) 142 x 78 x 73
Machine Weight 19,621 lbs

NOTE: Cutting Tools inside the holders ARE NOT INCLUDED - Thank you

NT SmartX Control
2 Turrets
Y-Axis ( upper turret)
Milling ( lower turret)
2 S-20 Collet Chucks
1 Kitagawa B-206 3 Jaw Chuck
C-Axis
High Pressure Coolant
Removable Tool Setter
LNS Chip Conveyor
Parts Catcher G
Parts Conveyor
LNS Quick Load Servo S3-T Bar feed
Spindle Liners

(1) KZ1510 CROSS MILL/DRILL ER25, 16912076
(1) KZ1510C CROSS MILL/DRILL ER25, COOLANT THRU
(1) KZ1510S CROSS MILL/DRILL, 2:1 SPEEDER, ER20, MA2.5S RT 2:1 16912031
(3) KZ1513 FACE MILL/DRILL ER25

This is a low hour, one shift machine that machined mostly 3/16” Stainless

220 Volt 3 Phase 60 Cycle
Machine Dimensions (L x W x H) 142 x 78 x 73
Machine Weight 19,621 lbs